Lift the handset or press the prime line.
Press Paging, Page, or Pager or the press the Page feature access key.
Dial the Paging zone number (if required).
Make the announcement.
Hang up or press the Cancel, Release,
End Call, or 
key.
Paging lets you connect to loudspeaker or paging equipment to make an announcement. You can access individual paging zones or all paging zones simultaneously. A one-way connection is established for "All Zones" paging. A two-way connection is established for "Individual Zones" loudspeaker page.
Before you are connected to the paging equipment, you will hear a two-second tone.
Loudspeaker Paging is provided through the Paging port on the Universal ASU, Analog Main Board, or Analog Options Board. A Loudspeaker Pager (amplifier) connects to this port which emulates E&M paging.
IP paging can also be provided through the Mitel IP Paging Unit. A Loudspeaker Pager (amplifier) connects to the Mitel IP Paging unit. The IP Paging unit connects to the network and is assigned a directory number (see the MiVoice Business Technician's Handbook for more information about IP Paging Units).
Paging applies to E&M paging systems.
You will be disconnected from the pager if you perform a switchhook flash.
You cannot Transfer, Forward, Camp-on, or set a Callback to the paging system.
Different individual paging zones can be accessed simultaneously; however, you will receive a busy tone when you attempt to:
page a zone already in use
page while an all-zone page is underway
make an all-zone page when an individual-zone page is underway.
You can interrupt a page using the Override feature key (or equivalent softkey or feature access code) if Loudspeaker Pager Override is enabled in your station's COS, but you cannot interrupt an all-zone page with an individual-zone page.
You cannot be interrupted by another page if Loudspeaker Pager Equivalent Zone Override Security is enabled in your station's COS unless an all-zone page attempts to interrupt your individual-zone page.
You cannot use Paging in Handsfree mode.
The system supports up to 15 zones (plus a sixteenth zone number for accessing all the zones simultaneously). Zones may be designated 00 to 15.
The phone's SPEAKER key will not have any effect when you are paging.
On attendant consoles, the pager cannot be accessed if current call information is displayed in the SOURCE or DESTINATION (DST) area.
Loudspeaker
Paging form
For E&M type paging, program the 2-digit Zone Number and Interconnect Number. In multiple-zone systems, all-zone paging must be designated 00 whether all-zone paging is enabled or not.
NOTE: The form accepts two-digit numbers for zones 0 through 9 but displays them as single digits when saved—for example, 00 displays as 0 and 02 as 2. Users dialing the zone number must dial the two-digit number. If they dial only one digit, the system will wait for the inter-digit timer in the user's Class of Service to expire before calling the zone.
Ensure that the station is not restricted from Paging.
Enable Pager Access All Zones and/or Pager Access Individual Zones.
Feature
Access Codes form
If you intend to use a feature access code in Operation, assign a code to Loudspeaker Paging.
Multiline
Set Keys form
If you intend to use a feature key in Operation, program a Paging key or use Superkey (see Feature Keys for more information on Superkey programming).
Supported on all devices.
To use paging:
Lift the handset.
Dial the Loudspeaker Paging Feature Access code.
Dial the 2-digit Paging Zone number (if required).
Make the Announcement.
Hang up.
To use Paging:
Lift the handset or press the prime line.
Press Paging, Page, or Pager or the press the Page feature access key.
Dial the Paging zone number (if required).
Make the announcement.
Hang up or press the Cancel, Release,
End Call, or key.
To use Paging:
Press Pager or Page.
Dial the 2-digit Paging zone number (if required).
Make the announcement.
Press Release or Cancel or the + or — key on the numeric keypad (MiVoice Business Console).